The increasing productivity due to faster and wider paving
machines as well as the higher material requisition for the installation
of elastic layers and elastic base layers require mixing
machines with an extreme output. The MixMatic M6008
is capable to mix rubber granulate with binder. By using an
optional material container gravel can be added to the
mixture, thus an output of up to 400 kg/min is achieved. The
material container for rubber granulate comprises 2.5 cubic
meter, for gravel 1.6 cubic meter and can be loaded either
with a BigBag or a shovel loader. The auger forwards the rubber
granulate or the gravel to the mixing pipe where it will be
homogeneously mixed with the binder.
The level of the single components will be controlled by
sensors. Thus the technique of the M6008 even covers the
increased material requisition in the construction of sports
surfaces. In order to ensure a smooth material flow between
M6008 and the paving machine the transport logistics
though has to be adjusted to the increased material output.
The M6008 is equipped with integrated truck-fork slots
for safe transport.
The suction pump as well as the dosage pump for the binder
are driven by electric motors in the same way as the augers
and the mixer. The use of frequency convertors for every
single electric motor enables a precise dosage. On the basis
of the specified mixing ratios and the desired output/minute,
the 7.5”-STN-touch-operation terminal calculates the nominal
values of the dosage pumps and augers. After manual
confirmation of the values and the following control calibration
the M6008 is operated via the manual control (optional
remote control). Output quantity and output time can be
adjusted to the size of the different transport vehicles. Preferably
the mixing material will be continuously forwarded to
a special material hopper where it can be removed by a
shovel loader or forklift.