TrackCutter TC400
Our Price: $0.00
Description
The removal of unusable or worn sport surfaces made of granulates or solid dynthetics is particularly problematic. The base, which is usually asphalt, can be detached relatively straight forward by means of a suitable stripping unit, nevertheless the surface produces undefinable panels and strips owing to the consistency of the material.
The TrackCutter cuts all elastic surfaces made of rubber granulates or PU into manageable panels or strips measuring approx. 1.00 m x 1.00 m by preference.
A wear resisting fly cutter seperates the surface. The cut depth can be adjusted infinitely variable from 0 - 25 mm. A side-marker permits cut widths of up to 1.00 m.
The cutting capacity is c. 400 m2/h using a cut depth of 10 mm and panel size or a cutting distance of 1.00 m. It is further possible to use the TrackCutter for the refurbishment of a surface. Therefore, cutting out damaged areas is much easier and quicker. An adjustable marker permits effortless cutting alongside of edgings and run-off gutters.
Cutting the surface prior to stripping it provides following advantages:
- Stripping is considerably easier
- Cut pieces can be lifted and piled up without difficulty
- Stacking and transport on pallets is more economical
- a better utilization of loading capacity in the case of road transport
- cost savings due to easy handling when recycling